Tytan 60 Seconds is the perfect adhesive for bricklaying, be it a decorative wall or a larger project like a set of partition walls. Tytan 60 Seconds can only be used to raise walls with calibrated materials. Popular calibrated materials include AAC (aerated autoclaved concrete) and ceramic bricks with hollow space.
Before laying the first layer with Tytan 60 Seconds, make sure that the glued surfaces are even. Follow the surface preparation instructions for a tight and durable bond. The first layer of the wall must be installed using traditional mortar in order to ensure a perfectly level wall.
Beads should be applied on the wall top, not on loose bricks. Apply the adhesive in beads to create both horizontal and vertical joints.
TIP! Plan ahead. First measure all corners of the designed wall and plan how the blocks or bricks are going to be laid. Lay a mason’s string from corner to corner to mark the position of each brick. Use a spirit level to make sure each brick contributes to an even wall.
For walls narrower than 15 cm apply a single bead of adhesive along the center of the wall. For walls wider than 15 cm, apply 2 beads, making sure they are 4 – 5 cm away from the wall face.
Please remember, that 60 Seconds is suitable for internal walls or minor bricklaying jobs, in case you need a solution for bricklaying external partition walls or load bearing walls in family houses please refer to Tytan Professional Foam Adhesive for Bricklaying, a certified solution for the above mentioned applications.
Always apply enough adhesive to glue not more than 2-3 bricks. Bricks position can be corrected within 1 minute from application. Tytan 60 Seconds cures fast, so be sure to immediately place the brick or block in its final position. When you are done with the first layer of bricks, you may immediately start laying the next layer.
TIP! The wall is going to reach full strength within 24 hours and this is when finishing layers, like plaster, can be applied. Further reinforcement of the wall can be acquired through applying Tytan 60 Seconds where the partition wall and the load-bearing wall come in contact.
|yield of 1 can|
|Material||Material’s dimensions (length and width), mm||Recommended thickness of the bead, mm||Tytan Professional 60 Seconds GUN 750 ml||Tytan Professional 60 Seconds STRAW 750 ml||Tytan Professional 60 Seconds STRAW 300 ml|
|Partitions walls from AAC||600 х 250||20 – 30||7 m2||5,2 m2||2,6 m2|
|Partitions walls from Ceramic Block||600 х 250||50 – 60||3.5 m2||2.6 m2||1.30 m2|
Kişisel bilgilerinize saygı duyuyoruz, bu nedenle sizi Gizlilik Politikamızı güncellediğimizi bildirmek istiyoruz. Kişisel verilerinizi nasıl kullandığımız konusunda net ve şeffaf bilgi sağlamak için. Her bölümde, hangi kişisel verilere sahip olduğumuzu ve bunları nasıl kullandığımızı ayrıntılı olarak açıklıyoruz. Ayrıca haklarınız hakkında, örneğin verilerinize nasıl erişebileceğiniz ve kullanmayı reddedebileceğiniz hakkında bilgiler de ekledik.